Home / Guides

Apartment turnover painting in Memphis: a make-ready guide

A good apartment turnover starts with a documented move-out inspection, a clear painting scope and a schedule shared by every trade. For Memphis-area apartment complexes, deciding what needs touch-ups, what needs a full repaint and which repairs must happen first helps avoid repeat visits before the next resident moves in.

Have units coming available? Send Legend Painting the property location, unit count, condition photos and target ready dates to discuss the painting scope.

Start with a unit-by-unit move-out inspection

Use the same checklist for every vacant apartment, but do not assume two units with the same floor plan need the same work. Walk walls, ceilings, closets, trim and doors before requesting bids.

  • • Record the unit number, floor plan, vacancy date and target move-in date.
  • • Photograph holes, peeling paint, stains, damaged corners and previous patches.
  • • Separate ordinary scuffs from repairs that need more than paint.
  • • Confirm that the unit is vacant, utilities are on and access is authorized.
  • • Resolve leaks and other moisture sources before repairing or coating damaged surfaces.

Touch-ups or a full repaint?

Touch-ups can work when the existing coating is sound and the exact product, color and sheen are known. Even the same color can flash against older paint because of wear, lighting or application differences. If a patch remains visible, repainting the wall from corner to corner is often a better choice than adding another small spot.

  • • Consider touch-ups for limited marks on otherwise clean, matching walls.
  • • Consider full-wall or full-unit repaints for widespread wear, mismatched patches or major color changes.
  • • List ceilings, closets, baseboards, doors and frames separately rather than assuming they are included.
  • • Check stain or odor sources first; primer selection does not replace cleaning or fixing the underlying issue.

Build a repeatable paint specification

A written standard is more useful than asking every vendor for apartment white. Keep a property paint record so maintenance staff and painting vendors use the same approved system.

  • • Manufacturer, product line, color name and color code.
  • • Sheen for walls, ceilings, trim and doors.
  • • Cleaning, patching, sanding, priming and finish-coat requirements.
  • • Floor, fixture and appliance protection, plus cleanup expectations.
  • • How changes and concealed damage must be approved before additional work.

Schedule painting around the other turnover trades

Coordinate leak repairs, electrical or plumbing access and wall repairs before final paint. Agree on the sequence for flooring, appliance work, cleaning and painting with the property team; the right order depends on the scope. Protect completed surfaces and reserve a final touch-up visit when other trades may leave marks.

  • • Share access instructions, parking rules, key pickup and work-hour restrictions.
  • • Track readiness by unit, not just by building or total unit count.
  • • Allow patching materials, primer and paint their required drying time.
  • • Distinguish dry-to-touch, recoat and full-cure times using the product instructions.
  • • Confirm the completion target after the walkthrough; do not assume every turnover can be finished in one day.

What to send for a comparable apartment painting bid

Legend Painting measures the work item by item on site. Apartment-turnover pricing depends on the actual surfaces, condition, repair needs, color changes and access. A blanket per-unit price can hide important differences, so ask for a written scope and a free on-site estimate.

  • • Property address and city, unit count and representative floor plans.
  • • Condition photos and whether units are vacant or occupied.
  • • Touch-up, wall-only or complete repaint scope, with ceilings and trim identified.
  • • Approved paint specification and who supplies materials.
  • • Expected turnover volume and requested ready dates—not a guaranteed schedule.
  • • Work-order process, approval contact, vendor paperwork requirements and payment terms.

Keep safety and resident privacy in the plan

For pre-1978 housing, determine whether the work is covered by EPA lead-safe renovation requirements before disturbing painted surfaces, and use appropriately certified firms when required. Suspect ceiling texture or other materials may need asbestos assessment before disturbance. Painting is not a substitute for resolving active water damage or arranging appropriate remediation.

  • • Follow product instructions for ventilation, surface preparation and drying.
  • • Keep residents and unauthorized visitors out of active work areas.
  • • Use approved access procedures; do not share resident information or access codes publicly.
  • • Keep public project photos free of unit numbers, personal belongings and identifying details.

Finish with a punch list before releasing the unit

Inspect in normal room lighting after coatings have dried enough to evaluate. The property representative should confirm the agreed scope is complete before the unit is marked ready.

  • • Check coverage, patch visibility and consistent sheen on each wall.
  • • Check cut lines, trim, door edges and any agreed ceiling work.
  • • Confirm floors, fixtures and hardware are free of paint splatter.
  • • Document outstanding touch-ups, approval and completion photos.
  • • Save the final paint specification with the unit's maintenance record.

Planning turnovers in Memphis and North Mississippi

Legend Painting works with property managers on interior painting and drywall repair across Memphis and nearby service areas, including Olive Branch and Hernando. Send the actual property location when discussing a turnover schedule. Our Olive Branch house photos below show real interior and wall-repair work—not an apartment-complex project or a claim of past multifamily contracts.

Interior painting and drywall repair from our Olive Branch house job

See all our work →
Bedroom with fresh gray walls and white trim after an interior repaint by Legend Painting
Bedroom repaint, ready for move-in
Before and after of anchor holes in a closet wall, patched and painted by Legend Painting
Anchor holes patched, wall repainted
Upstairs bonus room with fresh gray wall paint and white trim by Legend Painting
Bonus room repaint, walls and trim

These are residential project photos, not an apartment-complex turnover.

Discuss your apartment painting scope and request vendor information →

Drywall repair for damaged walls →

See our interior painting service →

Common questions

Does every apartment need a full repaint between tenants?

No. Inspect the condition and test whether touch-ups match. Widespread scuffs, color changes or visible patches may call for full-wall or full-unit painting; list the decision in the work order.

How long does apartment turnover painting take?

Timing depends on the unit size, repairs, coats, drying conditions and other trades. Confirm access and a target schedule after the walkthrough rather than assuming a fixed turnaround.

Can drywall repair be included in the turnover bid?

Yes. Identify holes, cracks and damaged areas during inspection and list the repair and repaint scope separately. Active leaks must be resolved before affected surfaces are finished.

Do you offer a fixed apartment price or volume discount?

Turnovers are quoted for the actual condition and scope. Share the number of units and expected frequency so we can discuss a written proposal; no universal per-unit price or discount is promised. Request a free on-site estimate.

How do we request vendor information?

Use the Property Managers page to send your company, property location, scope and requested dates, or call Legend Painting at (901) 256-6833. Confirm your paperwork and purchasing requirements before scheduling.

More Memphis painting guides

Call for Free Estimate